Antenna/Wire

As a converter between conducted waves and electromagnetic waves, antennas have different physical and electrical parameter design requirements based on different functional requirements. We provide full-frequency and diversified external antennas to achieve high-performance and efficient wireless transmission services.

Product introduction

USB extension cable-remove_copy_edited_edited.jpg

USB low impedance cable

USB2.0-Micro USB (5P) low-impedance extension cable, on-resistance is 3-5Ω, wire length is 200cm.

Click here to view specifications

5.8G-SMA(J) waterproof antenna-8cm

Waterproof antenna, the antenna height is 80mm, the frequency of the antenna is 2.4/5.8GHz, and it uses SMA(J) connector, and the waterproof grade is IP66.

Click here to view specifications

5.8G-SMA(J)Large S
Knife-shaped non-foldable antenna

The gain ratio is 2.5dBi, the antenna height is 169mm, the frequency of the antenna is 2.4/5.8GHz, and it uses SMA (J) connector.

Click here to view specifications

915MHz suction cup antenna

The gain ratio is 3dBi, the center frequency of the antenna is 915MHz, and the line length is 3M.

Click here to view specifications

Tri-band antenna

The gain value is 6DBi, the frequency can reach Wi-Fi6.

Click here to view specifications

LL195 antenna extension cable

The connector is SMA(M)-SMA(F), the wire length is 400cm, and V.S.W.R is only ≤1.2.

Click here to view specifications

5.8G-SMA(J) waterproof antenna-10cm

Waterproof antenna, the antenna height is 100mm, the frequency of the antenna is 2.4/5.8GHz, and it uses SMA(J) connector, and the waterproof grade is IP66.

Click here to view specifications